Tally Genicom Intelliprint 8026DN - Manual (Page 73)

Mar 06
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide 2-17
Cleaning the Printer
Cleaning the Printer
This section describes how to clean the printer in order to maintain the printer in good condition
and print clean printouts all the time.
CAUTION
• Be sure to switch off and unplug the machine before accessing the interior of the machine for
cleaning, maintenance, or fault clearance. Access to a live machine’s interior can cause
electric shock.
Cleaning the exterior
Clean the exterior of the printer about once a month. Wipe the surface with a damp, well-wrung
soft cloth. Then wipe with another dry soft cloth. For stubborn stains, moisten a soft cloth with a
small amount of neutral detergent, and gently wipe the stain off.
NOTE: Do not spray the detergent directly on the printer. The liquid detergent may enter
the printer through a gap and cause problems. Never use cleaning agents other
than neutral detergent.
Cleaning the interior
After clearing paper jams or replacing the Toner Cartridge, inspect the interior of the printer
before closing the top cover.
CAUTION
• Never touch areas labeled as “High Voltage.” You can get an electric shock.
• Never touch a labeled area found on or near the heat roller. You can get burnt. If a sheet of
paper is wrapped around the heat roller, do not try to remove it by yourself to avoid injuries or
burns. Switch off the machine immediately, and contact our Printer Support Desk.
■
Remove any remaining pieces of paper.
■
Remove any dust or stains with a dry clean cloth.