Tally Genicom Intelliprint 8026DN - Manual (Page 46)

Mar 06
1-18 TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide
Loading Paper
Connecting the Power Cord
WARNING
• The Power specifications are listed below. The specifications that apply to your machine
depend on your machine configuration. Connect the power plug only to a properly rated
power outlet. Otherwise, it can cause fire or electric shocks.
– Rated voltage 100/120 V
Rated frequency 50/60 Hz
– Rated voltage 220 – 240 V
Rated frequency 50/60 Hz
• Never use multi-plug adaptors to plug multiple power plugs in the same outlet. Be sure to
operate the machine on a sole-use receptacle. Multiple connectors can cause the outlet to
overheat and cause fire.
• To prevent fire or electric shocks, follow the instruction below based on your machine
configuration. If your machine is a 220 – 240 V model, there is no need to attach a separate
earth line since the earth connection is incorporated in the power line. Plug it into a properly
rated outlet.
• The earth wire must be connected to one of the following conductors:
– Earth terminal of the specified power outlet
– A piece of copper buried in the earth 650 mm (25.6") or deeper
– Earth terminal with Class D* earthing.
*Class D is the regulation for Japan only.
1. Connect the power cable into the printer, and plug it into the electrical wall outlet.