About this chapter, Installing dram memory dimms, About this chapter 8-2 – Tally Genicom Intelliprint 8026DN User Manual
Page 202: Installing dram memory dimms 8-2
Advertising
Mar 06
8-2
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide
Installing DRAM Memory DIMMS
About this Chapter
This chapter describes the procedures for installation of DRAM Memory DIMMs and the Hard
Disk Option. Also describes how to use the extended features associated with these options.
Installing DRAM Memory DIMMS
1. Carefully review the safety precautions in the front of this guide before starting this installa-
tion procedure.
2. Ensure that the printer power switch is set to the OFF [ O ] position.
3. Remove Tray 2 Rear Cover.
4. Disconnect the power cord and signal cable from the back of the printer.
AC Power
Cord
Parallel
Connector
Network
Connection
USB
Connector
Advertising