Output print data stored – for both pcl and ps – Tally Genicom Intelliprint 8026DN User Manual
Page 172
Mar 06
7-14
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide
Job Library
Output print data stored – for both PCL and PS
This section describes the procedure to output print data stored inside the machine using the
Store Print feature.
NOTE: You can also delete stored print data without printing.
1. Press <MENU>.
Menu
Job Library
2. Press <SELECT> to enter the Job Library menu.
Job Library
Print & Delete
3. Press <NEXT> to move to the submenu "Print".
Job Library
4. Press <SELECT> to enter the submenu "Print".
User * DIR
5. Press <PREVIOUS> or <NEXT> until desired directory is shown:
Job1 Dir
6. Press <SELECT>.
Number1
Delete
User Folder 1
1. Press NEXT or PREVIOUS to scroll through
the User Folder Names.
2. Press SELECT to choose the desired User
Folder.
Delete
Job1
1. Press NEXT or PREVIOUS to scroll through
the Print Job Names.
2. Press SELECT to choose the desired Print
Job to Delete.
Job Name
PIN
This step is necessary if
the job is a PRIVATE job.
1. Press NEXT or PREVIOUS to increase or
decrease each digit of the four-digit
number.
2. Press SELECT to set one digit and move to
the next digit.
3. Press SELECT after changing the last digit
to save this setting.
SUBMENU
DEFAULT
SETTING
AVAILABLE
SETTINGS
PROCEDURE FOR CHANGING SETTING