Tally Genicom Intelliprint 8026DN - Manual (Page 93)

Mar 06
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide 3-7
Print Quality Problems
Colored dots are
printed at regular
intervals (about 30
mm/1.2") The drum cartridge is dirty. Clean the drum cartridge.
Refer to
• “Cleaning the Drum Cartridge” on
page 2-21
Partial blanks,
creased paper or
blotted printing The paper is damp. Replace the paper.
Refer to
• “Paper Handling” on page 2-6
The paper is outside the
recommended specification range. Replace the paper with a
recommend size and type.
Refer to
• “Paper Handling” on page 2-6
The transfer roll cartridge or fuser
unit is not installed correctly. Reinstall the transfer roll cartridge
and/or fuser unit.
Refer to
• “Transfer Roll Cartridge” on page
5-14
• “Fuser Unit” on page 5-17
Condensation inside the printer
causes partial blanks or creased
paper. Turn the printer on and leave it one
hour at least to get rid of the
condensation. If the problems still
occur, contact your dealer or a
Customer Service Center for
assistance.
Description Cause Action