Job library errors, Job library errors 7-20 – Tally Genicom Intelliprint 8026DN User Manual
Page 178
Mar 06
7-20
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide
Job Library
Job Library Errors
When a Job Library error occurs, the following message will be displayed:
JOBLIB Error XX
Press Start
This is a continuable-fault, which means the START key must be pressed to allow operations to
continue. If the current job is aborted as a result of the error, the message"Canceling Job" may
be displayed after START is pressed. "XX" in the error display above is an error code. The error
codes for this message are:
■
01 – Data stream was missing a Job Name specification. (Job will be aborted.)
■
02 – Data stream was missing a User Name specification. (Job will be aborted.)
■
03 – Data stream was missing a PIN specification. (Job will be aborted.)
■
04 – Attempted to overwrite a PRIVATE job, but PIN did not match. (Job will be aborted.)
■
05 – Insufficient storage. (Job will be aborted only if it is a PRIVATE job.)