Tally Genicom Intelliprint 8026DN - Manual (Page 171)

Mar 06
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide 7-13
Job Library
Operation on the control panel – for both PCL and PS
1. Press the MENU button on the control panel.
2. “MENU” is shown on the first line and “Job Library” is shown on the second line of the
display.
3. Press the SELECT button to enter the Job Library menu.
4. Press the NEXT button to move through the submenus: Print & Delete, Print, or Delete.
5. Press the SELECT button to enter a submenu.
Use the procedures in the following table to access and change the system settings.
SUBMENU DEFAULT
SETTING AVAILABLE
SETTINGS PROCEDURE FOR CHANGING SETTING
Print & Delete 1. Print & Delete is used to print a stored job
and then delete it. The procedure the same
functions as if you selected PRINT and then
selected DELETE. See the Print and Delete
instructions below.
Print Print
User Folder 1 1. Press NEXT or PREVIOUS to scroll through
the User Folder Names.
2. Press SELECT to choose the desired User
Folder.
Print Print
Job1 1. Press NEXT or PREVIOUS to scroll through
the Print Job Names.
2. Press SELECT to choose the desired Print
Job.
Job Name
PIN This step is necessary if
the job is a PRIVATE job. 1. Press NEXT or PREVIOUS to increase or
decrease each digit of the four-digit
number.
2. Press SELECT to set one digit and move to
the next digit.
3. Press SELECT after changing the last digit
to save this setting.
Print Job Name
Copies – Select
1-99 1. Press NEXT or PREVIOUS to increase or
decrease each digit of the two-digit number.
2. Press SELECT set one digit and move to
the next digit.
3. Press SELECT after changing the last digit
to save this setting.
Print Job Name
Copies 1. Press SELECT to print the job.
Print Printing
Playback 1. The printer will display PRINTING on Line 1
and PLAYBACK on Line 2 of the display
while printing the job.
Delete Delete
(To delete a
saved job) 1. Press NEXT or PREVIOUS to scroll through
Print or Delete options.
2. Press SELECT to choose Delete.