Installing the flash option in the printer, Installing the flash option in the printer 8-6 – Tally Genicom Intelliprint 8026DN User Manual
Page 206
Advertising
Mar 06
8-6
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide
Installing the Flash Option in the Printer
9. Insure the Compact Flash is pressed all the way into the connector.
10.Reinstall the controller assembly in reverse order as shown in Steps 5 and 6.
11.Reconnect the power cord and signal cable to the printer as shown in Step 4Reinstall the
Tray 2 rear cover as shown in Step 3.
12.Turn the printer power switch to the ON [ I ] position.
Installing the Flash Option in the Printer
1. Carefully review the safety precautions in the front of this guide before starting this
installation procedure.
2. Ensure that the printer power switch is set to the OFF [ O ] position.
3. Remove Tray 2 Rear Cover.
Advertising