Tally Genicom Intelliprint 8026DN - Manual (Page 99)

Mar 06
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide 3-13
Warning Messages and Error Messages
Error Messages
The table below lists error messages, the possible causes of each error, and the actions
required to recover from each error.
Error Message Possible Cause Action
Load Paper Tray [x]
[type] [size] There is no paper or wrong paper in
tray [x] Add correct paper type to
corresponding tray
Tray [x] Missing
Insert Tray Tray [x] is out of printer Insert the corresponding tray into
printer
Front Cover Open
Close Cover The front cover is open Close the front cover
Feed Jam
Check Tray [x] A paper jam has occurred in tray [x] Remove jammed paper from
corresponding tray
Registration Jam
Open Cover A A paper jam has occurred inside of
printer Open cover A and remover the
jammed paper
Registration Jam
Open Cover B A paper jam has occurred inside of
printer Open cover B and remove the
jammed paper
Fuser Jam
Open Cover B A paper jam has occurred inside the
printer Open cover B and remove the
jammed paper
Duplex Jam
Open Cover B A paper jam has occurred inside the
printer Open cover B and remove the
jammed paper
Fuser Missing
Install Fuser The fuser is missing from the printer Re-install the fuser
BTR Missing
Install BTR The BTR is missing from the printer Re-install the BTR
PHD Missing
Install PHD The process unit is missing from the Re-install the PHD (process) unit
Toner [x] Missing
Install Toner [x] Toner cartridge [x] is missing Re-install the corresponding toner
cartridge
Fuser Life Over
Replace Fuser The fuser unit needs to be replaced Replace the fuser unit
BTR Life Over
Replace BTR The BTR unit needs to be replaced Replace the BTR unit
PHD Life Over
Replace PHD The process unit needs to be
replaced Replace the PHD (process) unit.
Toner [x] Empty
Replace Toner Toner cartridge [x]is empty Replace toner cartridge [x]
Fuser Type Err
Install / Reset Wrong fuser unit installed Re-install or replace with correct
fuser
Fuser Type Err
Install / Reset Wrong fuser unit installed Re-install or replace the fuser unit