Storing paper, Loading paper, Loading paper in the multipurpose feeder – Tally Genicom Intelliprint 8026DN User Manual
Page 67: Storing paper 2-11, Loading paper 2-11, Loading paper in the multipurpose feeder 2-11, Loading paper” (p. 2-11)
Mar 06
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide
2-11
Storing Paper
Storing Paper
Failure to properly store paper can result in paper jams, impaired print quality, or damage to the
printer. Store paper under the following conditions:
• Temperature 10
o
to 30
o
C (50
o
to 86
o
F)
• In a dry place
• After opening the package, wrap unused sheets in their original package and store in a
cabinet or other dry place.
• Store paper on a flat surface. Do not lean paper against other objects or place it in an upright
position.
• Avoid storing paper in way that may cause creasing, folding, or curling.
• Store paper away from direct sunlight.
Loading Paper
This section explains how to load paper when the paper in the paper tray runs out.
Loading Paper in the Multipurpose Feeder
In addition to plain paper, the multipurpose feeder can use various other sizes and types of print
media such as envelopes and transparencies.
Make sure of the following points when loading paper in the multipurpose feeder.
• You can load up to 150 sheets or a stack of paper (60 g/m
2
to 216 g/m
2
) less than 15 mm
(0.6") high.
• The multipurpose feeder accepts print media within the following dimensions:
- Width: 88.9 mm to 220 mm (3.5" to 8.7")
- Length: 139.7 mm to 355.6 mm (5.5" to 14")
• You can load paper (64 g/m
2
to 105 g/m
2
) up to 900 mm long. However, paper over 355.6 mm
(14") in length has to be fed one sheet at a time and supported by hand.
Important
• Make sure of the following points to avoid any troubles during printing.
• Do not load different types of paper at the same time.
• Use high quality paper for laser printers to print at high quality. Refer to “Paper Handling”
(P. 2-6) for details.
• Do not remove or add paper to the multipurpose feeder when printing or if there is any paper
still in the multipurpose feeder. Doing so may cause a paper jam.
• Load paper printable surface facing down. Also, load the paper which you want to print on
first in the top of the multipurpose feeder.
• Do not put any objects other than paper on the multipurpose feeder. Also, do not push or
force down the multipurpose feeder.