Configuring enum zones, Configure an enum zone, Enum dialing – TANDBERG Security Camera User Manual
Page 123
123
D14049.03
MAY 2008
Grey Headline (continued)
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
ENUM Dialing
Configuring ENUM Zones
In order for locally registered endpoints to use
ENUM dialing, you must configure an ENUM
zone for each ENUM service used by remote
endpoints. To do this:
VCS Configuration > Zones
•
.
You will be taken to the
Zones
page.
Click
•
New
.
You will be taken to the
Create Zone
page.
Enter the zone
•
Name
and select a
Type
of
ENUM
.
Click
•
Create Zone
.
You will be taken to the
Edit Zone
page.
xConfiguration Zones Zone [1..200
ENUM Dialing for Outgoing Calls
Any number of ENUM zones may be
configured on the VCS.
You should configure at least one ENUM
zone for each DNS suffix that your endpoints
may use.
Normal zone pattern matching and
prioritization rules will apply to ENUM
zones.
Name
Assigns a name to this zone.
Type
For ENUM zones, this will be
ENUM
.
Hop count
Specifies the hop count to be used when
sending an alias search request to this zone. If
the search request was received from another
zone and already has a hop count assigned,
the lower of the two values will be used.
DNS suffix
The DNS zone that is to be queried for a
NAPTR record. This suffix is appended to the
transformed E.164 number in an attempt to
find a matching NAPTR record.
H.323 mode
Determines whether or not H.323 records will
be looked up for this zone.
SIP mode
Determines whether or not SIP records will be
looked up for this zone.
Match1 - Match5
These sections allow you to specify any filtering
criteria and/or transforms you wish to apply to
this zone. See
Configuring Transforms for ENUM
for full information on how the
Match
options can be applied.