Overview – TANDBERG Security Camera User Manual
Page 25
25
D14049.03
MAY 2008
Grey Headline (continued)
The
Overview
page summarizes the current
configuration and status of your VCS.
The
Overview
page opens automatically when
you first log on to the web interface.
You can also access it at any time by clicking
on the
Overview
menu at the top left of any
page.
IPv6 address
The VCS’s IPv6 address(es).
Traversal calls
Current
: The number of traversal calls going
through the VCS at this moment.
Max (peak)
: The highest number of concurrent
traversal calls handled by the VCS since it was
last restarted.
Total
: The total number of traversal calls
handled by the VCS since it was last restarted.
See the section
for details on
what constitutes a traversal call.
Non-traversal calls
Current
: The number of non-traversal calls
going through the VCS at this moment.
Max (peak)
: The highest number of concurrent
non-traversal calls handled by the VCS since it
was last restarted.
Total
: The total number of non-traversal calls
handled by the VCS since it was last restarted.
System name
The name that has been assigned to the VCS.
Software version
The version of software that is currently
installed on the VCS.
IPv4 address
The VCS’s IPv4 address(es).
Viewing the Overview Page
Understanding the Overview Page
Options
The maximum number of calls and
registrations, and the availability of additional
VCS features such as User Policy and Dual
Network Interfaces, are controlled through the
use of Option Keys. This section shows all the
Options that are currently installed on the VCS.
Registrations
Current
: The number of endpoints registered to
the VCS at this moment.
Max (peak)
: The highest number of endpoints
concurrently registered to the VCS since it was
last restarted.
Total
: The total number of registrations on the
VCS since it was last restarted.
Up time
The amount of time that has elapsed since the
system last restarted.
Many of the items on this page are
configurable, and contain links to the
page where they can be configured. For
example, clicking on
System name
will take you
to the
System Administration
page, from where
you can configure the system name.
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Overview