Dialing by address types, About the different address types, Dialing by ip address – TANDBERG Security Camera User Manual
Page 93: Endpoints registered to a vcs expressway, Dialing by h.323 id or e.164 alias, Dialing by h.323 or sip uri, Dialing by enum
93
D14049.03
MAY 2008
Grey Headline (continued)
The destination address that is entered via the caller’s endpoint can take a number of different
formats, and this will affect the specific process that the VCS follows when attempting to locate the
destination endpoint. The address types supported by the VCS are:
IP address
•
e.g.
10.44.10.1
or
3ffe:80ee:3706::10:35
H.323 ID
•
e.g.
john.smith
or
E.164 alias
•
e.g.
441189876432
or
6432
URI
•
e.g.
ENUM
•
e.g.
441189876432
or
6432
Each of these address types may require some configuration of the VCS in order for them to be
supported. The following sections describe the configuration required for each address type.
Dialing by IP address is necessary when the destination endpoint is not registered with any system
(e.g. VCS, gatekeeper or Border Controller). If the destination endpoint is registered with one of
these systems, then it may still be possible to call it using its IP address but we recommend that
one of the other addressing schemes should be used instead as they are more flexible.
In order to make a call by dialing the destination endpoint’s IP address, the call must be able to be
routed via a VCS that is configured with a
setting of
Direct
. This
could be the local VCS, or it could be one of its neighbors (in which case the local VCS would route
the call to the neighbor, which would then place the call directly to the IP address).
However, if the destination IP address is found in a local subzone (i.e. it is an endpoint registered
to the same VCS as the endpoint making the call), then the call will be placed regardless of the
Calls to Unknown IP Addresses
setting.
Endpoints registered to a VCS Expressway
Calls made by dialing the IP address of an H.323 endpoint registered directly with a VCS
Expressway will be forced to route through the VCS Expressway. The call will therefore be subject to
any restrictions configured on that system.
About the Different Address Types
!
If you are calling from an unregistered endpoint, we do not recommend dialing the
destination endpoint using its IP address. The presence of a firewall may disrupt the call.
Instead place the call to the VCS to which the destination endpoint is registered as
described in
Calls from an Unregistered Endpoint
No special configuration is required in order to place a call using an H.323 ID or E.164 alias.
The VCS follows the usual process and searches for the ID or alias among its local registrations
and those of its Alternates. If no match is found, it may forward the query on to its neighbors,
depending on the match and priority settings of each.
When a user places a call using URI dialing, they will typically dial
.
For endpoints that are not locally registered, URI dialing may make use of DNS to locate the
destination endpoint. In order to support full URI dialing on the VCS you must configure it with at
least one DNS server and at least one DNS zone,
Full instructions on how to configure the VCS to support URI dialing (both outbound and inbound)
are given in
ENUM dialing allows an endpoint to be contacted by a caller dialing an E.164 number - a telephone
number - even if that endpoint has registered using a different format of alias. The E.164 number
is converted into a URI by the DNS system, and the rules for URI dialing are then followed to place
the call.
The ENUM dialing facility allows you to retain the flexibility of URI dialing whilst having the simplicity
of being called using just a number - particularly important if any of your callers are restricted to
dialing via a numeric keypad.
In order to support ENUM dialing on the VCS you must configure it with at least one DNS server and
the appropriate ENUM zone(s).
Full instructions on how to configure the VCS to support ENUM dialing (both outbound and inbound)
are given in
.
!
SIP endpoints must register using a URI. We recommend that H.323 endpoints also register
with an H.323 ID in the form of a URI to facilitate interworking.
Dialing by IP Address
Dialing by H.323 ID or E.164 alias
Dialing by H.323 or SIP URI
Dialing by ENUM
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Dialing by Address Types