TANDBERG Security Camera - Manual (Page 134)

134
D14049.03
MAY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Subzones
Name
Enter the name you wish to assign to the subzone. You will refer
to this name when creating Links and Pipes.
Subnet 1
Enter the subnet IP Address and Prefix , This will define the
range of IP addresses that will belong to the first subnet in this
subzone.
Subnet 2 - 5
Use these fields to define up to 4 further subnets for this
Subzone.
Save
Click here to save your changes.
Bandwidth
See Applying Bandwidth Limitations to Subzones for a
description of these fields.
Configuring a Subzone
To configure a subzone:
VCS Configuration > Local Zone > Subzones • .
You will be taken to the Subzones page.
Click on the subzone you wish to configure.
You will be taken to the
Edit Subzone page.
xConfiguration Zones LocalZone SubZon • e
Address range =
This shows the range of IP addresses that will be allocated to
this subzone, based on the combination of the subnet address
and prefix length that have been configured.