Command reference - xcommand, Ip protocol, Xcommand – TANDBERG Security Camera User Manual
Page 215: Command reference, Xcommand command referenc
215
D14049.03
MAY 2008
Grey Headline (continued)
Overview
The
xCommand
group of commands are used
to add and delete items and issue system
commands.
The following pages list all the
xCommand
commands currently available on the VCS.
To issue a command, type the command as
shown, followed by one or more of the given
parameters and values. The valid values for
each parameter are indicated in the angle
brackets following each parameter; these are
explained opposite.
To obtain information about using each of the
xCommand
commands from within the CLI:
type
•
xCommand
or
xCommand ?
to return
all current
xCommand
commands available
on the VCS.
type
•
xCommand <command>
or
xCommand <command> ?
to return all
parameters for that command, along with
the valuespace and a description for each.
The valid value for this
parameter is a string. The
minimum and maximum
number of characters is
shown after the
S
.
When issuing this command,
the string must be typed in
double quotes.
The valid values for this
parameter are one of the
options shown within the
angle brackets.
The valid value for this
parameter is an integer. The
minimum and maximum
values are shown within the
angle brackets.
(r)
indicates that this is a
required parameter. The
(r)
is not part of the command.
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Command Reference - xCommand