TANDBERG Security Camera - Manual (Page 168)

168
D14049.03
MAY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Restarting
Restarting the VCS
Some configuration changes will require a restart of the system
to take effect. There will be a
Restart button at the bottom of
any web pages that include such options, and clicking on this
button will take you to the
Restart page. If you do not restart the
system after making these changes, you will receive a warning
telling you the system needs to be restarted.
Restarting will cause any active calls and registrations to be
terminated. For this reason, the
Restart page displays the
number of current calls and registrations, so you can check
these before you restart.
Restart System
Click here to restart the system.
The
Restarting page will appear, with an orange bar indicating
progress.
Once the system has successfully restarted, you will
automatically be taken to the
Login page.
! Do not restart the system while the red ALM LED on the
front of the box is on. This indicates a hardware fault.
Contact your TANDBERG representative.
To restart the VCS:
Maintenance > Restart • .
You will be taken to the Restart page.
From any configuration page, click the Restart button. •
You will be taken to the Restart page.
xCommand Boo • t
Overview