Command reference - xstatus – TANDBERG Security Camera User Manual
Page 234
234
D14049.03
MAY 2008
Grey Headline (continued)
Registrations: {0..3750 entries} {Section visible only if there are registrations }
Registration: <1..3750>
SerialNumber: <S: 1,255>
Calls: {Section visible only if there are calls}
Call [0..900]: {0..900 entries}
CallId: <S: 1,255>
Searches:
Current:
Total:
Dropped:
Zone [1..200]:
Name: <S: 1,50 Node name>
Bandwidth:
Used: <0..100000000>
Status: <Active/Failed/Warning>
Cause: {Visible if status is Failed or Warning} <System unreachable/ Systems unreachable>
Type: <Neighbor/TraversalClient/TraversalServer/ENUM/DNS>
Neighbor: {Visible if Type is Neighbor}
Primary:
H323: {Visible if H323 Mode=On for Zone}
Status: <Unknown/Active/Failed>
Cause: {Visible if Status is Failed} <No response from system/DNS resolution failed/Invalid IP address>
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
SIP: {Visible if SIP Mode=On for Zone}
Status: <Unknown/Active/Failed>
Cause: {Visible if Status is Failed} <No response from system/DNS resolution failed/Invalid IP address>
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Command Reference - xStatus