TANDBERG Security Camera - Manual (Page 195)

195
D14049.03
MAY 2008
Grey Headline (continued)
Error Reports URL: <S: 0, 128>
The URL of the web service to which error reports are sent.
Default: Off
Example: xConfiguration Error Reports URL: "http://192.168.0.200/submitapplicationerror/"
Ethernet [1..2] IP V4 Address: <IPAddr>
Specifies the IPv4 address of the specified LAN port.
Note: You must restart the system for any changes to take effect.
Default: 192.168.0.100
Example: xConfiguration Ethernet 1 IP V4 Address: 192.168.10.10
Ethernet [1..2] IP V4 SubnetMask: <IPAddr>
Specifies the IPv4 subnet mask of the specified LAN port.
Note: You must restart the system for any changes to take effect.
Example: xConfiguration Ethernet 1 IP V4 SubnetMask: 255.255.255.0
Ethernet [1..2] IP V6 Address: <S: 0, 39>
Specifies the IPv6 address of the specified LAN port.
Note: You must restart the system for any changes to take effect
Example: xConfiguration Ethernet 1 IP V6 Address: "2001:db8::1428:57ab"
Ethernet [1..2] Speed: <Auto/10half/10full/100half/100full/1000full
Sets the speed of the Ethernet link from the specified LAN port. Use Auto to automatically configure the speed.
Note: You must restart the system for any changes to take effect.
Example: xConfiguration Ethernet 1 Speed: Auto
ExternalManager Address: <S: 0, 128>
Sets the IP Address or Fully Qualified Domain Name (FQDN) of the External Manager.
Example: xConfiguration ExternalManager Address: 192.168.0.0
ExternalManager Path: <S: 0, 255>
Sets the URL of the External Manager.
Default: tms/public/external/management/SystemManagementService.asmx
Example: xConfiguration ExternalManager Path: "tms/public/external/management/SystemManagementService.asmx"
H323 Gatekeeper AutoDiscovery Mode: <On/Off>
Determines whether or not the VCS responds to gatekeeper discovery requests from endpoints.
Default: On
Example: xConfiguration H323 Gatekeeper AutoDiscovery Mode: On
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Command Reference - xConfiguration