TANDBERG Security Camera - Manual (Page 193)

193
D14049.03
MAY 2008
Grey Headline (continued)
Bandwidth Downspeed PerCall Mode: <On/Off>
Determines whether or not the VCS will attempt to downspeed a call if there is insufficient per-call bandwidth available to fulfill the request.
On : the VCS will attempt to place the call at a lower bandwidth.
Off : the call will be rejected.
Default: On
Example: xConfiguration Bandwidth Downspeed PerCall Mode: On
Bandwidth Downspeed Total Mode: <On/Off>
Determines whether or not the VCS will attempt to downspeed a call if there is insufficient total bandwidth available to fulfill the request.
On : the VCS will attempt to place the call at a lower bandwidth.
Off : the call will be rejected.
Default: On
Example: xConfiguration Bandwidth Downspeed Total Mode: On
Bandwidth Link [1..600] Name: <S: 1, 50>
Assigns a name to this link.
Example: xConfiguration Bandwidth Link 1 Name: "HQ to BranchOffice"
Bandwidth Link [1..600] Node1 Name: <S: 0, 50>
Specifies the first zone or subzone to which this link will be applied.
Example: xConfiguration Bandwidth Link 1 Node1 Name: "HQ"
Bandwidth Link [1..600] Node2 Name: <S: 0, 50>
Specifies the second zone or subzone to which this link will be applied.
Example: xConfiguration Bandwidth Link 1 Node2 Name: "BranchOffice"
Bandwidth Link [1..600] Pipe1 Name: <S: 0, 50>
Specifies the first pipe to be associated with this link.
Example: xConfiguration Bandwidth Link 1 Pipe1 Name: "512Kb ASDL"
Bandwidth Link [1..600] Pipe2 Name: <S: 0, 50>
Specifies the second pipe to be associated with this link.
Example: xConfiguration Bandwidth Link 1 Pipe2 Name: "2Gb Broadband"
Bandwidth Pipe [1..100] Bandwidth PerCall Limit: <1..100000000>
If this pipe has limited per-call bandwidth, sets the maximum amount of bandwidth (in kbps) available for any one call.
Default: 1920
Example: xConfiguration Bandwidth Pipe 1 Bandwidth PerCall Limit: 256
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Command Reference - xConfiguration