Command reference - xstatus – TANDBERG Security Camera User Manual
Page 229
229
D14049.03
MAY 2008
Grey Headline (continued)
NTP:
Status: <Inactive/Initializing/Active/Failed>
Cause: {Visible if status is Failed} <No response from NTP server/ DNS resolution failed>
Address: <IPv4Addr/IPv6Addr>
Port: <1..65534>
Last Update: <date-time>
Last Correction: <Time in seconds, precision in seconds>
LDAP:
Status: <Inactive/Initializing/Active/Failed>
Cause: {Visible if status is Failed} <Failed to connect to LDAP server / The LDAP server does not support TLS. / Failed to establish a TLS connection to the LDAP server. Please check that the LDAP
server certificate is signed by a CA, and that CA is included on the CA certificate installed on the VCS. / Failed to authenticate with LDAP server / A valid CA certificate for the LDAP database has not
been uploaded; this is required for connections via TLS / No server address configured>
Address: <IPv4Addr/IPv6Addr>
Port: <1..65534>
External Manager:
Status: <Inactive/Initializing/Active/Failed>
Cause: {Visible if status is Failed} <Failed to connect to external manager / No response from external manager / Failed to register to external manager / DNS resolution failed >
Address: <IPv4Addr/IPv6Addr >
Protocol: HTTP
URL: <S: 0, 255>
Feedback [1..3]:
Status: <On/Off>
URL: <S: 1,255>
Expression: <S: 1,127> {0..15 entries}
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Command Reference - xStatus