TANDBERG Security Camera - Manual (Page 64)

64
D14049.03
MAY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Configuration
VCS
Configuration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
SIP
SIP mode
Determines whether or not the VCS will provide
SIP functionality (i.e. SIP Registrar and SIP
proxy services).
Registration expire delta
Specifies the period within which a SIP
endpoint must re-register to prevent its
registration expiring.
The default is
60 .
SIP registration proxy mode
Specifies how proxied registrations and invites
will be handled.
Off : Registration requests will not be proxied
(but will still be permitted locally if the VCS is
authoritative for that domain). Invite requests
with existing Route Sets will be rejected.
Proxy to known only : Registration requests will
be proxied, and invite requests will be proxied
only if the Route Set contains the URI(s) of
neighbors (including traversal clients and
traversal servers).
Proxy to any : Registration requests and invite
requests will always be proxied.
UDP mode
Determines whether or not incoming SIP calls
using the UDP protocol will be allowed.
The default is
On .
UDP port
Specifies the listening port for incoming SIP
calls over UDP.
The default is
5060 .
TCP mode
Determines whether or not incoming SIP calls
using the TCP protocol will be allowed.
The default is
On .
TCP port
Specifies the listening port for incoming SIP
calls over TCP.
The default is
5060 .
TLS mode
Determines whether or not incoming SIP calls
using the TLS protocol will be allowed.
The default is
On .
TLS port
Specifies the listening port for incoming SIP
calls over TLS.
The default is
5061 .
SIP settings are configured via:
VCS Configuration > Protocols > SIP > •
Configuration .
You will be taken to the SIP page.
xConfiguration SI • P
Configuring SIP - Registrations, Protocols and Ports
Save
Click here to save your changes.
TCP Outbound Port End
Specifies the upper port in the range to be
used by outbound TCP/TLS SIP connections.
The default is
29999 .
TCP Outbound Port Start
Specifies the lower port in the range to be used
by outbound TCP/TLS SIP connections.
The default is
25000 .