USRobotics Instant802 APSDK - Manual (Page 180)

Professional Access Point
Administrator Guide
Class Structure, Commands, and Examples - 180
Ethernet (Wired) Interface yes
You can configure all Ethernet (Wired) set-
tings from the CLI except "Connection
Type".
To change the Connection Type from
DHCP to Static IP addressing (or vice
versa), you must use the Web User Inter-
face.
yes
Wireless Interface yes yes
Security yes yes
Set Up Guest Access yes yes
Enable/Configure Guest Login Welcome Page yes
Configuring Multiple BSSIDs on Virtual Wire-
less Networks yes yes
Radio Settings yes
You can configure all Radio settings from
the CLI except for turning on/off Super G.
yes
MAC Filtering yes yes
Load Balancing yes yes
Quality of Service yes yes
Wireless Distribution System yes yes
Time Protocol yes yes
Reboot the Access Point yes
Reset the Access Point to Factory Defaults yes yes
Upgrade the Firmware You cannot upgrade the firmware from the
CLI. To upgrade firmware, use the Web
User Interface as described in
“Upgrade”
on page 172 .
yes
Backup and Restore You cannot backup or restore an access
point configuration from the CLI. To
backup or restore an access point configu-
ration, use the Web User Interface as
described in
“Backup/Restore” on
page 174 .
yes
Feature or Setting Configurable from CLI Configurable
from Web User
Interface