USRobotics Instant802 APSDK - Manual (Page 295)

Professional Access Point
Administrator Guide
Regulatory Information - 295
CE Compliance
Declaration of Conformity
We, U.S. Robotics Corporation of 935 National Parkway, Schaumburg, Illinois, 60173-5157 USA, declare
under our sole responsibility that the products, USRobotics Professional Access Point, Models 5453 and
5453A, to which this declaration relates, are in conformity with the following standards and/or other
normative documents:
EN300 328
EN301 489-1
EN301 489-17
EN60950-1
EN50392
EN50361
We, U.S. Robotics Corporation, hereby declare the above named product is in compliance and conformity
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10 and detailed in Annex IV of Directive 1999/
5/EC has been followed.
This equipment is in compliance with the European recommendation 1999/519/ECC, governing the
exposure to the electromagnetic radiation.
These products can be used in the following countries: UK, Ireland, Spain, Portugal, Germany, France,
Luxembourg, Italy, Switzerland, Austria, Netherlands, Belgium, Norway, Sweden, Denmark, Finland,
Czech Republic, Poland, Hungary, and Greece.
An electronic copy of the original CE Declaration of Conformity is available at the U.S. Robotics website:
www.usr.com
Regarding IEEE 802.11b/g frequencies, we currently have the following information about restrictions in
the European Union (EU) countries:
• Italy
Please be aware that use of the wireless device is subject to the following Italian regulation:
1. D.Lgs 1.8.2003, number 259, articles 104 (activities where General Authorization is
required) and 105 ( free use), for private use;
2. D.M 28.5.03 and later modifications, for the supplying to public RadioLAN access for net-
works and telecommunication services
• France
In France metropolitan, outdoor power is limited to 10mW (EIRP) within 2454MHz – 2483, 5MHz
frequency band