USRobotics Instant802 APSDK - Manual (Page 28)

Professional Access Point
Administrator Guide
Setting Up and Launching Your Wireless Network - 28
3. Review the list of access points found.
The Detection Utility will detect the IP addresses of Professional Access Points. Access points are
listed with their locations,
MAC addresses, and IP Address es. If you are installing the first access point
on a single-access-point network, only one entry will be displayed on this screen
Verify the MAC addresses shown here against the Professional Access Point’s LAN MAC address.
(You can find the LAN MAC on the label on the bottom of the access point.) This will be especially
helpful later in providing or modifying the descriptive
Location name for each access point.
No
te
If no access points are found, the Detection Utility indicates this and presents troubleshooting informa-
tion about your LAN and power connections. Once you have checked hardware power and Ethernet
connections, you can click the Detection Utility
Back button to search again for access points.