USRobotics Instant802 APSDK - Manual (Page 206)

Professional Access Point
Administrator Guide
Class Structure, Commands, and Examples - 206
To see the kinds of information about access point neighbours you can search on, type get detected-ap
TAB TAB.
USR5453-AP# get detected-ap
[Enter] * Get common fields *
band Frequency band
beacon-interval Beacon interval in kus (1.024 ms)
capability IEEE 802.11 capability value
channel Channel
detail * Get all fields *
erp ERP
last-beacon Time of last beacon
mac MAC address
num_beacons Number of beacons received
phy-type PHY mode detected with
privacy WEP or WPA enabled
rate Rate
signal Signal strength
ssid Service Set IDentifier (a.k.a., Network Name)
supported-rates Supported rates list
type Type (AP, Ad hoc, or Other)
wpa WPA security enabled
To get the neighbouring access points, type get detected-ap.
USR5453-AP# get detected-ap
Field Value
-----------------------------------------
mac 00:e0:b8:76:28:e0
type AP
privacy On
ssid Purina
channel 6
signal 2
Field Value
-----------------------------------------
mac 00:0e:81:01:01:62
type AP
privacy Off
ssid Internal Instant802 Network
channel 6
signal 1
Field Value
-----------------------------------------
mac 00:e0:b8:76:1a:f6
type AP
privacy Off
ssid domani
channel 6
signal 3
Field Value