USRobotics Instant802 APSDK - Manual (Page 286)

Professional Access Point
Administrator Guide
Installation and Connectivity Troubleshooting - 286
Possible Solution 2:
Ensure that the wireless device is set to Infrastructure mode and has the following settings in common with
the access point:
• SSID, also called Network Name .
• Kind of security (for example, WPA)
• Security key value
• 802.11 mode
If you change the settings on the access point, remember to change the settings on your wireless devices
also.
Possible Solution 3:
Ensure that the access point is broadcasting its SSID:
1. Open the Web User Interface of the access point.
2. From the Advanced menu, select Security .
3. Verify that Broadcast SSID is set to Allow .
4. Click Update to save any change.
Possible Solution 4:
If you use MAC filtering on the access point, verify that the MAC address of the client is allowed to access
your wireless network:
1. Open the Web User Interface of the access point.
2. From the Advanced menu, select MAC Filtering .
3. If you selected Allow only stations in list , verify that the client’s MAC address is included in the Stations
List.
If you selected Allow any station unless in list , verify that the client’s MAC address is not included in the
Stations List.
Possible Solution 5:
Reboot the access point by disconnecting and then reconnecting its power adapter.