USRobotics Instant802 APSDK - Manual (Page 183)

Professional Access Point
Administrator Guide
Class Structure, Commands, and Examples - 183
1. Start your SSH application. (This example uses PuTTY.)
2. Enter the IP address of the access point and click Open .
(If your Domain Name Server is configured to map domain names to IP addresses via DHCP, you can
enter the domain name of the access point instead of an IP address.)
This brings up the SSH command window and establishes a connection to the access point. The login
prompt is displayed.
login as:
3. Enter the default Administrator username and password for the Professional Access Point (admin,
admin), and press "Enter" after each. (The password is masked, so it will not be displayed on the
screen.)
login as: admin
[email protected]'s password:
Enter 'help' for help.
When the user name and password is accepted, the screen displays the Professional Access Point
help command prompt.
USR5453-AP#
You are now ready to enter CLI commands at the command line prompt. In addition to commands that
affect the behavior or the access point, the CLI supports the following commands that pertain to Telnet