USRobotics Instant802 APSDK - Manual (Page 199)

Professional Access Point
Administrator Guide
Class Structure, Commands, and Examples - 199
Remove a User Account
To remove a user account, type the following
USR5453-AP# remove radius-user wally
Use the " get " command to view all user names. (You can see "wally" has been removed.)
USR5453-AP# get radius-user all name
name
--------
larry
samantha
endora
darren
Status
The command tasks and examples in this section show status information on access points. These
settings correspond to what is shown on the Status tabs in the Web User Interface. (
“Status” on page 77 )
This table provides a quick view of all Status commands and links to detailed examples.
This table shows a quick view of Status commands and provides links to detailed examples
Note
Make sure you are familiar with the names of the interfaces as described in “Understanding Interfaces
as Presented in the CLI” on page 190 . The interface name you reference in a get command deter-
mines whether the command output shows a wired or wireless interface or the Internal or Guest net-
work.
Status Command Example
Understanding Interfaces as Presented in
the CLI Reference of interface names and purposes as described in “Under-
standing Interfaces as Presented in the CLI” on page 190 .
Global command to get all detail on a
Basic Service Set (BSS).
This is a useful command to use to get a
comprehensive understanding of how the
access point is currently configured.
get bss all detail
Get Common Information on the Internal
Interface for the Access Point get interface br0
Get All Wired Settings for the Wired Inter-
nal Interface get interface br0
Get Current Settings for the Ethernet
(Wired) Guest Interface get interface brguest
get interface brguest mac
get interface brguest ssid
Get the MAC Address for the Wired Inter-
nal Interface get interface wlan0 mac