Set the broadcast ssid (allow or prohibit), Enable / disable station isolation – USRobotics Instant802 APSDK User Manual

Page 215

Advertising
background image

Professional Access Point

Administrator Guide

Class Structure, Commands, and Examples - 215

radius-ip 127.0.0.1
radius-key secret
open-system-authentication
shared-key-authentication
wpa-cipher-tkip
wpa-cipher-ccmp
wpa-allowed off
wpa2-allowed off
rsn-preauthentication

Set the Broadcast SSID (Allow or Prohibit)

To set the Broadcast SSID to on (allow):

USR5453-AP# set bss wlan0bssInternal ignore-broadcast-ssid on

To set the Broadcast SSID to off (prohibit):

USR5453-AP# set bss wlan0bssInternal ignore-broadcast-ssid off

Enable / Disable Station Isolation

USR5453-AP# get radio wlan0 station-isolation
off
USR5453-AP# set radio wlan0 station-isolation off
USR5453-AP# get radio wlan0 detail
Field Value
---------------------------------------------------------------
status up
description Radio 1 - IEEE 802.11g
mac
max-bss 4
channel-policy static
mode g
static-channel 6
channel 6
tx-power 100
tx-rx-status up
beacon-interval 100
rts-threshold 2347
fragmentation-threshold 2346
load-balance-disassociation-utilization 0
load-balance-disassociation-stations 0
load-balance-no-association-utilization 0
ap-detection off
station-isolation off
frequency 2437
wme on

Advertising