USRobotics Instant802 APSDK - Manual (Page 247)

Professional Access Point
Administrator Guide
Class Structure, Commands, and Examples - 247
Field Value
--------------------------
status up
server ntp.instant802.com
Reboot the Access Point
To reboot the access point, simply type "reboot" at the command line:
USR5453-AP# reboot
Reset the Access Point to Factory Defaults
If you are experiencing extreme problems with the Professional Access Point and have tried all other
troubleshooting measures, you can reset the access point. This will restore factory defaults and clear all
settings, including settings such as a new password or wireless settings.
The following command resets the access point from the CLI:
USR5453-AP# factory-reset
Keyboard Shortcuts and Tab Completion Help
The CLI provides keyboard shortcuts to help you navigate the command line and build valid commands,
along with "tab completion" hints on available commands that match what you have typed so far. Using the
CLI will be easier if you use the tab completion help and learn the keyboard shortcuts.
• Keyboard Shortcuts
• Tab Completion and Help
Note
Keep in mind that the factory-reset command resets only the access point you are currently admin-
istering; not other access points in the cluster.
For information on the factory default settings, see “Default Settings for the Professional Access Point”
on page 16 .