USRobotics Instant802 APSDK User Manual
Page 185
Professional Access Point
Administrator Guide
Class Structure, Commands, and Examples - 185
Command
Description
get
The "get" command allows you to get the field values of existing instances of a class.
Classes can be "named" or "unnamed". The command syntax is:
get unnamed-class [ field ... | detail ]
get named-class [ instance | all [ field ... | name | detail ] ]
The rest of the command line is optional. If provided, it is either a list of one or more
fields
, or the keyword detail.
An example of using the "get" command on an unnamed class with a single instance is:
get log
(There is only one log on the access point. This command returns information on the log
file.)
An example of using the "get" command on an unnamed class with multiple instances is:
get log-entry
(There are multiple log entries but they are not named. This command returns all log
entries.)
An example of using the "get" command on a named class with multiple instances is:
get bss wlan0bssInternal
(There are multiple bss’s and they are named. This command returns information on the
BSS
named "wlan0bssInternal".)
An example of using the "get" command on a named class to get all instances:
get radius-user all name
get radius-user all
Note: "
wlan0bssInternal
" is the name of the basic service set (
BSS
) on the internal
network (
wlan0
interface). For information on interfaces, see