Zebra Technologies TTP 8000 - Manual (Page 107)

107 Specifications
Paper Handling
10/19/2009 TTP 8000 Technical Manual P1003638-003
Paper Handling
Paper supply Fan fold or roll paper
Paper width A4 (210.2 mm) or Letter Size (8.5”) selectable by moving paper
guides.
Printout length 297 mm (A4) 148.5-mm (A5) or 11” (Letter) 5.5” (Statement),
or variable length 92* mm and up. There is no upper limit for
printout length, but if the printout exceeds 4 m, the paper will be
cut, then the printout will continue.
*. The 01760-xxx, that is the vertical version of TTP 8000 has a minimum printout length
of 200 mm.
Cutting Guillotine cutter.
Presenter operation**
**. Compact version of TTP 8000 does not have any presenter / pull detector.
Holds printout until printed then cuts and presents the complete
printout. Extremely long printouts can be partially ejected to
limit loop buildup.
Pull detector A pull detector detects when the customer pulls the paper and
then starts motorized paper eject
Eject length after cut Default 50 mm. up to 255 mm extra feed can be added. The
resolution is ±3 mm.
Printout retraction***
***. Compact versions do not have retract function.
Pulls back uncollected printouts and throws them in a
wastebasket inside the kiosk.
Paper loading Load paper, press button to get automatic feed, cut, and eject.
Automatic "on-line" after successful paper load.
Sensors Optical sensors: Out of paper, paper near end (optional) and
weekend level sensor (optional). “Paper in presenter” and eject
length sensors in presenter unit.
Switch sensors: Cutter in home position, and printhead lifted.