Zebra Technologies TTP 8000 - Manual (Page 26)

Operation
Installing a Paper Roll 26
P1003638-003 TTP 8000 Technical Manual 10/19/2009
Installing a Paper Roll
Preparations
1. Turn the new paper roll as shown. The paper should be inserted into the printer with the
temperature-sensitive side up.
Figure 12 • Paper Roll Orientation
2. Tear off approximately 0.5 m from the new paper roll.
Figure 13 • Tear Off 0.5 m from the New Paper Roll
Caution • This is important since the outer end of the paper is usually fixed to the roll with
some type of glue or self-adhesive substance that might otherwise cause paper jam or
even printhead damage.