Zebra Technologies TTP 8000 - Manual (Page 47)

47 Programming
Text Commands
10/19/2009 TTP 8000 Technical Manual P1003638-003
Prints a customized logotype 2 stored in the flash PROM. See also Logotypes on page 67 .
ESC g n...n5
Print Logotype
1B 67 n1...n5 hex
27 103 n1...n5 decimal
2. For logotype loading, see "ESC & 1" under System Related Commands on page 52 .
n1 One-byte logotype identification No. (0—15)
n2n3 Two-byte definition of desired print position in X-direction measured
from left-hand edge of the page (see
Page Setup on page 87 regarding
definition of “page”). X-direction is perpendicular to the paper transport
direction.