Zebra Technologies TTP 8000 - Manual (Page 83)

83 Default Parameter Settings
Fixed Document Mode
10/19/2009 TTP 8000 Technical Manual P1003638-003
Defines the distance between the top of the paper and the top of the first text line in 0.1 mm
steps. The top margin feed is effectuated when the presenter is cleared from the previous page.
Avoid settings 1 – 18 mm because then the printer must reverse the paper before starting to
print, which may cause paper jam, especially at small roll diameters.
Sets the function of the "retract and retain" function.
43 & 44
0 , 0 Default
Top Margin (mm)
0 , 0 Min
255 , 255 Max
0 = disabled top margin. This gives the physical top margin of the printer which is
19 mm.
<ESC>&P<43><1><ESC>&P<44><44>
Add 30-mm top margin.
45
3 Default
Waste Basket Mode DRV 0 Min
130 Max
Note • Changed in firmware version 2.21
<ESC>&P<45><0>
Eject uncollected page when new page is printed. (Waste
basket disabled)
<ESC>&P<45><3>
Eject uncollected page when new page is printed. Page not
collected after 30s will be retracted. (Range 1-30, 1 step =
approximately 10 s)
<ESC>&P<45><100>
Retracts uncollected page when new page is printed
<ESC>&P<45><103>
Retracts uncollected page when new page is printed. Page
not collected after 30s will be retracted. (Range 101-130, 1
step = approximately 10 s)