Esc 3 n1 – Zebra Technologies TTP 8000 User Manual
Page 42
Programming
Text Commands
42
P1003638-003
TTP 8000 Technical Manual
10/19/2009
This command is used to increase the line spacing.
Prints data from the input buffer and feeds the paper to the top of the next page.
In fixed document length (FORM-mode) this command prints data in the input buffer and
feeds the paper to the top of next page.
In variable document length mode the Feed button advances to the minimum page length. If
the printout already is longer than the minimum page length, the Feed button does not feed the
paper at all.
In black-mark mode, the <FF> command looks for a black mark, see <ESC>Z.
If "Auto cut" is set to 1 (see
), the Feed button effects form-feed,
cut, and eject.
Shifts the current print position to the next Tab position.
Set tab positions with parameters
.
ESC 3 n1
Line Spacing
1B 33 n1
hex
27 51 n1
decimal
Note •
Obsolete command, may disappear from future program releases. Use parameter
instead.
FF
Form Feed
0C
hex
12
decimal
Note •
Use parameters p37 and p38 to define page length.
HT
Horizontal Tabulation
09
hex
9
decimal