Zebra Technologies TTP 8000 - Manual (Page 121)

121 Specifications
Paper Specification
10/19/2009 TTP 8000 Technical Manual P1003638-003
Paper Specification
General
Thermal Coating
Perforation
Paper supply Roll or fanfold paper with heat sensitive coating (thermal paper)
Type of paper Types of paper are listed on www.zebra.com.
Number of layers One
Paper weight 55—105 g/m²
Paper thickness 0.054—0.10 mm
Surface smoothness 450-s minimum according to Bekk TAPPI T 479
Reflection 80% minimum according to SCAN P3
Max roll diameter 260 mm
Core Paper or plastic
Core inner diameter Minimum 50 mm
Paper end Must not be glued to the core
Paper width 210.2 +0/–0.3 mm, or 216 +0/–0.3 mm depending on model
Paper length Approx. 110 m (with 110-mm roll diameter and 65 g/m²)
Approx. 230 m (with 150-mm roll diameter and 65 g/m²)
Approx. 690 m (with 250-mm roll diameter and 65 g/m²)
Thermal coating Outer
Sensitivity Activated at approx. 68 °C saturated at approx. 75 °C.
Dynamic sensitivity 1.14 ±0.04 OD
Top coating Standard, semi or UV (if applicable)
Tear-off perforation Punching must be done from outer side (thermal coating side)
with a sharp perforation tool.