Ug - graphics information inquiry 3-95, Command - graphics information inquiry -95 – Zebra Technologies EPL2 User Manual
Page 113
Advertising
UG Command - Graphics Information Inquiry
Description This command will cause the printer to send in-
formation about graphics currently stored in the
printer back to the host.
Syntax
UG
The printer will send the number of graphics
stored and each graphic’s name to the host
through the RS-232 port.
Example:
UG
¿
Will Produce:
###
:number of graphics
GRAPHICNAME1
: first graphic name
GRAPHICNAME2
: second graphic name
...
GRAPHICNAMEn
:last graphic name
980352-001 Rev.A
3-95
Advertising