Zebra Technologies EPL2 - Manual (Page 62)

FR Command - Retrieve Form
Description Use this command to retrieve a form that was
previously stored in memory.
Syntax FR"FORMNAME"
Parameters “FORMNAME” = This is the form name
used when the form was stored.
· The name may be up to 8 characters long.
· Form names stored by the printer are case
sensitive and will be stored exactly as entered
on the FS command line; i.e. “FORM1” ,
“form1” and “FoRm1” are three different
forms when stored into the printer or when re-
trieved by the user.
Example: FR"TEST1" ¿ :retrieves the form named TEST1
To print a list of the forms currently stored in
memory, use the FI command.
3-44
980352-001 Rev.A