Zebra Technologies EPL2 - Manual (Page 129)

^@ Command - Reset Printer
Description This command is used to reset the printer.
Syntax ^@¿ :where ^is 94 decimal
This command emulates Power Off and then
Power On; thus reinitializing the printer.
· The reset command is unavailable during the
operation of storing PCX graphics, soft fonts
or while the printer is in dump mode.
· The reset command cannot be used in a
stored form.
· The reset command can be sent to the printer
during all other printing operations.
· The printer will ignore all commands sent
while the reset command is executing, up to 2
seconds.
Example: ^@ ¿ :The printer will reset
980352-001 Rev.A
3-111