Zebra Technologies EPL2 - Manual (Page 96)

q Command - Set Label Width
Description Use this command to set the width of the print-
able area of the media.
Syntax qp
1
Parameters p
1
= The width of the label measured in dots.
The q command will cause the image buffer to
reformat and position to match the selected la-
bel width ( p
1
).
3-78
980352-001 Rev.A
Printable
Area
Print Head
Max.
Image
Buffer
Max.
Image
Buffer
Center Alignment
q
Image Buffer
Positioning - Center
Aligned Printers
Printable
Area
Print Head
Image
Buffer
Left Alignment Edge
Q
q
Image Buffer
Positioning - Left
Aligned Printers