P - print 3-76, Command - print -76, P command - print – Zebra Technologies EPL2 User Manual
Page 94
Advertising
P Command - Print
Description Use this command to print the contents of the
image buffer.
Syntax
Pp
1
,
[p
2
]
Parameters
p
1
= Number of label sets.
Range = 1 to 65535
p
2
= Number of copies of each label (used in
combination with counters to print mul-
tiple copies of the same label).
Range = 1 to 65535
The
P
command cannot be used inside of a stored
form sequence. For automatic printing of stored
forms, use the
PA
command.
Examples:
P1↵
:prints one label set
P2,1↵
:prints 2 label sets of one label each
P5,2↵
:prints 5 label sets of 2 labels each
3-76
980352-001 Rev.A
Advertising