O command - hardware options – Zebra Technologies EPL2 User Manual
Page 92
Advertising
O Command - Hardware Options
Examples:
O
:disables all options.
OC
:enables cutter only, labels are cut after each
:label is printed, disables all other options
OD
:enables direct thermal mode on thermal transfer
:printers, disables all other options
Od
:disables diagnostic dump mode and disables
:all other options
OCb
:labels are cut after a batch of five has printed,
...
:disables all other options
P5
:Sets the number of labels to print before the cut
3-74
980352-001 Rev.A
Advertising