Zebra Technologies EPL2 - Manual (Page 78)

LW Command - Line Draw White
Description Use this command to draw white lines, effec-
tively erasing previous information.
Syntax LWp
1
, p
2
, p
3
, p
4
Parameters p
1
= Horizontal start position (X) in dots.
p
2
= Vertical start position (Y) in dots.
p
3
= Horizontal length in dots.
p
4
= Vertical length in dots.
Example: N↵ :clear image buffer
LO50,100,400,20↵ :draw black line
LO50,200,400,20↵ :draw another black line
LO50,300,400,20↵ :draw another black line
LW200,50,20,400↵ :draw a white line over all 3 black lines
P1↵ :print 1 label
Will Produce:
3-60
980352-001 Rev.A