Zebra Technologies EPL2 - Manual (Page 61)

FK Command - Delete Form
Description This command is used to delete forms from
memory.
Syntax FK [ "FORMNAME" | "*" ]
Parameters “FORMNAME” = By entering the name of a
form, that form will be deleted from
memory.
· The name may be up to 8 characters long.
· Form names stored by the printer are case
sensitive and will be stored exactly as entered
on the FS command line; i.e. “FORM1” ,
“form1” and “FoRm1” are three different
forms when stored into the printer or when re-
trieved by the user.
· Deleting a single form requires the
FK”FORMNAME” be issued twice for each
form to be deleted. Some label generation
programs re-issue forms (form delete and
store) every time a label is printed which re-
duces flash memory life.
“*” = By including an “*” (wild card), ALL
forms will be deleted from memory. The
FK”*” does not need to be issued twice
to delete all forms.
Example: FK"AFORM" ¿ :deletes form “AFORM”
FK"AFORM" ¿ :second delete form “AFORM” required
:for flash printers
FK"*" ¿ :deletes all forms
3-43
980329-001 Rev.A