Zebra Technologies EPL2 - Manual (Page 68)

GM Command - Store Graphics
Description Use this command to store PCX graphics files in
memory.
Syntax GM"NAME"p
1
¿
“DATA”
Parameters “NAME” = This is the graphic name that will
be used when retrieving the stored
graphic.
· The name may be up to 8 characters long.
· Graphic names stored by the printer are case
sensitive and will be stored exactly as entered
with the GM command line; i.e. “LOGO1” ,
“logo1” and “LoGo1” are three different
graphics when stored into the printer or when
retrieved by the user.
p
1
= This is the file size in bytes. Use the DOS
DIR command to determine the exact file
size.
“DATA” = Graphic data in 1-bit (black &
white) PCX (binary data) format file.
❏A graphic will not store if sufficient memory is
not allocated to graphic memory. See the M
command for details on adjusting and con-
figuring memory to store graphics (forms and
soft fonts).
❏Verify the proper storage of the graphic with
the GI command.
3-50
980352-001 Rev.A