Zebra Technologies EPL2 - Manual (Page 88)

oR Command - Character Substitution (Euro)
The oR command is a global printer command.
❏It can not be issued inside of a form.
❏It must be issued prior to issuing a text com-
mand (and printing).
❏Effects a single character on a single code
page. Changing the character position will
restore the original character.
❏Flash memory printer parameter data is pre-
served until it is changed by the oR com-
mand or reprogramming of the printer.
Example: oRE ¿ : Places the Euro character into character
: map position 213 decimal
: (D5 hexadecimal)
oRE,128 ¿ : Places the Euro into character map
: position 128 decimal (80 hexadecimal)
oR ¿ : Clears Character Substitution,
: Restores default character maps
3-70
980352-001 Rev.A