Zebra Technologies EPL2 - Manual (Page 119)

US Command - Enable Error Reporting
Description Use this command to enable the printer’s status
reporting feature.
· Serial Port - If an error occurs, the printer
will send a NACK(0x15), followed by the er-
ror number, to the computer. If no errors oc-
cur, the printer will echo ACK(0x6) after each
P command.
If paper or ribbon empty occurs, the printer
will send, through the serial port, a”-07” and
“Pnnn” where nnn is the number of labels re-
maining to print.
· Parallel Port - If an error occurs, the printer
will print the error number and the printer’s
indicator(s) LED will indicate an error condi-
tion. See the individual printer user’s manual
for details.
Syntax US[p
1
]
The printer’s default setting is off.
Parameters p
1
= 1 Optional Parameter
If no errors occur, the printer will echo
ACK(0x6) after each label that is successfully
printed.
980352-001 Rev.A
3-101