Voltage and current readback, Voltage and current readback –18, Figure 4-8 – Xantrex Technology XTR 850 Watt User Manual
Page 110: Voltage readback using apg connector j1 –18, Figure 4-9, Current readback using apg connector j1 –18
Advertising
Analog Programming (APG) and Isolated Analog Programming (ISOL)
4-18
975-0200-01-01
4. Press the Rotary knob/Enter button to return to normal mode.
5. If the APG mode was modified in step 2, execute the procedure to
deactivate the APG voltage mode.
Quick Tip
Remote operation
uses these SCPI
commands. See
page 5–1.
The SCPI command (s) for these instructions are:
[:]SYSTem[<channel>]:REMote:SOURce:CURRent[:NISOlated]
[:]SYSTem[<channel>]:COMMunicate:APRogram:CURRent[:ISOla
ted]:LEVel
[:]MEASure[<channel>]:APRogram:CURRent[:SCALar][:DC]?
Voltage and Current Readback
The pin numbers are described in Table 4-3 on page 4–5.
Figure 4-8 Voltage Readback Using APG Connector J1
Figure 4-9 Current Readback Using APG Connector J1
Advertising
This manual is related to the following products: