SEVERIN FR 2414 - Manual (Page 10)

cord to touch hot surfaces or to come
into contact with any heat sources. Do
not allow the power cord to hang free;
the cord must be kept well away from hot
parts of the appliance.
Always switch off and remove the plug
z
from the wall socket aft er use, as well as
in cases of any malfunction and, -
during cleaning. -
When removing the plug from the wall
z
socket, never pull on the power cord;
always grip the plug itself.
Caution:
z
do not operate the appliance
outdoors.
Th
e appliance is not intended to be
z
operated by means of an external timer or
separate remote-control system
No responsibility is accepted if damage
z
results from improper use, or if these
instructions are not complied with.
Th
is appliance is intended for domestic or
z
similar applications, such as in
staff kitchens, offi ces and other -
commercial environments,
agricultural areas,
-
hotels, motels etc. and similar -
establishments,
bed-and-breakfast guest houses.
-
In order to comply with safety regulations
z
and to avoid hazards, repairs of electrical
appliances must be carried out by qualifi ed
personnel, including the replacement
of the power cord. If repairs are needed,
please send the appliance to one of our
customer service departments. Th
e
address can be found in the appendix to
this manual.
Th ermal safety cut-out
Should the oil/fat level fall below the safe
level for operation, the integral thermal safety
cut-out will be activated and the heating
element is switched off . If this occurs, allow
suffi
cient time for the appliance to cool down,
then add the required amount of oil/fat. Use
the reset lever inside the power cord storage
compartment to reset the safety cut-out. Only
aft er a reset can the appliance be used again.
Should the safety cut-out be activated
repeatedly despite a suffi
cient oil/fat amount
in the frying container, the appliance must no
longer be used; please have it examined by a
qualifi ed person before it is used again.
Operation
Before using for the fi rst time
Before fi rst use, the unit should be cleaned as
described in General care and cleaning.
Lid
Always use the lid handle when taking off or
replacing the lid.
Frying container
Th
e recess below the heating element acts as a
cooling area where residual particles resulting
from the frying process, as well as other
impurities, are collected. Th
e circulation
of the oil/fat results in a lower temperature
level around the recess area. Th
is collection
process extends the life-span of the frying
oil/fat.
Inserting the frying container: –
Place the frying container into the housing.
Fill amount: –
Before heating up, the oil/fat level must be
between the minimum and maximum fi ll
level marks inside the frying container.
Note: the diff
erence between the
minimum and maximum marks is
approx. 900ml.
Types of oil/fat to be used: –
Only pure vegetable oil/solidifi ed fat
should be used in this deep fryer. It can
be heated up to 220° C and is neutral in
taste.
Do not mix diff erent kinds of oil/fat.
Oil:
We recommend the use of oil specifi cally
intended for deep-frying, which may be
safely heated to high temperatures. Th
e
10